Δεν έχετε εγγραφεί ακόμα; Δημιουργήστε το δικό σας λογαριασμό και παρακολουθήστε όλα τα στάδια εξέλιξης της παραγγελίας σας.
Ολοκληρώστε την παραγγελία σας άμεσα χωρίς εγγραφή στο ηλεκτρονικό μας κατάστημα.
Συμπεριλαμβάνεται ΦΠΑ
Οι τιμές και η διαθεσιμότητα ενδέχεται να αλλάξουν χωρίς προειδοποίηση
Dynamic neckband microphone Cardioid polar pattern Light wire frame and headband offer a secure, comfortable fit Thin, extra strong microphone cable that resists breakage Collapsible microphone boom for easy storage and transportation Uniform, natural frequency response comparable to high-quality dynamic vocal microphones High input clipping level eliminates overload distortion Reliable at temperature and humidity extremes Three-pin XLR connector with removable belt clip Frequency range: 50 Hz - 15 kHz Output impedance: 200 O Open circuit sensitivity: -67 dBV/Pa (0.45 mV) High protection against corrosion Incl. cable clip and wind shield Weight approx. 100 g
Earset Gooseneck microphone with duo jack plug 3.5/ 2.5 mm for LPD and PMR devices, e.g. ALAN G5 Set, Tectalk Pro XL or Alan 777 (in use with Article 175393)r Alan 777
Lavalier microphone Cardioid polar pattern 3-Pin. mini XLR connector (AKG compatible!) Incl. Wind shield Suitable for all t.bone wireless systems except for the TWS One
SHURE Beta 98 H/C για πνευστα & κρουστα Miniature Instrument MicrophoneThe Shure Beta 98H / C (also known as WB98H / C for use with wireless systems) is a high-quality, permanently polarised condensation microphone with a cardioid polar pattern that is attached either to the bell of wind instruments or to the tensioning ring of drums or percussion instruments. The integrated gooseneck and the pivotable clamp connection make it easy to align the microphone and secure it. An isolating vibration absorber reduces the transmission of flap and other mechanical noises. The included swan neck fixation is designed to keep the microphone in the optimum position when moving more strongly. The Beta 98H / C operates with a transformerless preamplifier circuitry for better linearity over the entire transmission range, while the cardioid polar pattern provides high feedback-resistant gains and an excellent suppression of unwanted subsonic noises. The high maximum sound pressure level makes it possible to meet the extreme requirements of brass, woodwind and percussion instruments. The Beta 98H / C comes with a latching windscreen, a case, a swan neck fixation and a cable holder. The preamplifier can be operated with any 11 - 52 volt phantom power. Where there is no phantom power, the WB98H / C can be used with the battery powered MX1BP preamplifier. Cardioid With permanently polarised condensate capsule Integrated clothing clip and gooseneck Snap-on foam windscreen Specifically suitable for Winds TQG port for direct connection to wireless systems Optimised frequency response for open, natural sound reproduction Interchangeable capsules available with optional different polar patterns Frequency response: 20 Hz - 20 kHz Output impedance: 150 Ohm Open circuit sensitivity: -56 dBV / Pa (1.6 mV) Maximum sound pressure level: 163 dB SPL Self-noise (equivalent SPL): 31 dB (A) Power supply: 11 to 52 V Weight of the microphone: 65 g
Condenser lavalier microphoneThe WL series are lavalier microphones with a permanently polarized condenser capsule for use with wireless pocket transmitters. Each microphone has a 1.2m cable with a 4 pin miniature connector. For added flexibility, the integrated tie clip can be rotated in 90 degree increments. WL185 (cardioid characteristic): For general applications where background noise has to be suppressed. The use of a windscreen is strongly recommended. Shooting angle 130 degrees. Modular - With exchangeable electret condenser capsule Characteristic: Cardioid TQG connector for wireless application Includes wind and meeting protection Two different pins and bag Transmission range: 50 Hz - 17 kHz Output impedance: 1.8 kO No-load sensitivity: -45.5 dBV / Pa (10 mV) Maximum sound pressure level: 130.5 dB SPL Self-noise (equivalent sound pressure level): 28.0 dB (A) Dimensions (L x O): 22 x 12 mm Power supply: +5 V (1.5 - 10 V) Temperature range: -18 � to 57 � C Relative humidity: 0 to 95%